The increase in isometric twitch force observed in fast-twitch rodent muscles during or after activity, known universally as potentiation, is normally associated with myosin regulatory light chain (RLC) phosphorylation. Interestingly, fast muscles from mice devoid of detectable skeletal myosin light chain kinase (skMLCK) retain a reduced ability to potentiate twitch force, indicating the presence of a secondary origin for this characteristic feature of the fast muscle phenotype. The purpose of this study was to assess changes in intracellular cytosolic free Ca2+ concentration ([Ca2+]i) after a potentiating stimulus in mouse lumbrical muscle (37°C). Lumbricals were loaded with the Ca2+-sensitive fluorescent indicators fura-2 or furaptra to detect changes in resting and peak, respectively, intracellular Ca2+ levels caused by 2.5 s of 20-Hz stimulation. Although this protocol produced an immediate increase in twitch force of 17 ± 3% (all data are n = 10) (P < 0.01), this potentiation dissipated quickly and was absent 30 s afterward. Fura-2 fluorescence signals at rest were increased by 11.1 ± 1.3% (P < 0.01) during potentiation, indicating a significant increase in resting [Ca2+]i. Interestingly, furaptra signals showed no change to either the amplitude or the duration of the intracellular Ca2+ transients (ICTs) that triggered potentiated twitches during this time (P < 0.50). Immunofluorescence work showed that 77% of lumbrical fibers expressed myosin heavy chain isoform IIx and/or IIb, but with low expression of skMLCK and high expression of myosin phosphatase targeting subunit 2. As a result, lumbrical muscles displayed no detectable RLC phosphorylation either at rest or after stimulation. We conclude that stimulation-induced elevations in resting [Ca2+]i, in the absence of change in the ICT, are responsible for a small-magnitude, short-lived potentiation of isometric twitch force. If operative in other fast-twitch muscles, this mechanism may complement the potentiating influence of myosin RLC phosphorylation.
Excitation–contraction coupling (ECC) of vertebrate striated muscle is the process by which changes in membrane potential are translated into mechanical force by contractile proteins (Gordon et al., 2000). Seminal work by Ebashi and Endo (1968) established that calcium release from the sarcoplasmic reticulum with subsequent binding of Ca2+ ion to regulatory proteins resident on the thin filament was the key intermediate step in this process. Subsequent work has provided evidence that the activation of the contractile apparatus, and resultant force, work, and power, is a complex process involving both Ca2+-dependent and Ca2+-independent activation of the thin filament, including several inter- and intra-filament cooperative interactions (Lehrer, 2011).
During ECC, muscle force may be modulated via changes in the amplitude of the Ca2+ signal delivered to the contractile apparatus or by the Ca2+ sensitivity of the contractile apparatus. In this simple two-compartment model, an augmented Ca2+ signal may be achieved via an augmented release from the voltage-sensitive Ca2+ release channels or reduced Ca2+ buffering such as that performed via the sarcoplasmic–endoplasmic reticulum Ca2+ ATPase pumps, either of which could potentiate twitch contractions by increasing the Ca2+ occupancy of TnC and thus increasing the probability of “open” states on the regulated thin filament (McKillop and Geeves, 1993; Maytum et al., 1999). An increased Ca2+ sensitivity, on the other hand, may be mediated at the level of the myofilaments by muscle length and attendant variations in myofilament interdistance, as first demonstrated by Endo (1972) in skinned and later confirmed by Claflin et al. (1998) in intact skeletal fibers. In addition to these geometric factors, posttranslational modifications of contractile proteins, such as the phosphorylation of the myosin regulatory light chains (RLCs), have been demonstrated to increase the Ca2+ sensitivity of both skeletal and cardiac muscle cells (Persechini et al., 1985; Sweeney and Kushmerick, 1985; Sweeney and Stull, 1986). Thus, it seems clear that the ECC process of vertebrate striated muscle is subject to myriad influences that modulate the Ca2+ response of the myofilament assembly.
Close and Hoh (1968) were among the first to propose that stimulation-induced alterations to ECC could account for a classical characteristic of the mammalian fast-twitch muscle phenotype, that of posttetanic potentiation, defined as the increase in isometric twitch force observed after brief tetanic stimulation. In this regard, studies using isolated fast-twitch rodent skeletal muscle have shown quantitative associations between phosphorylation of the RLC and isometric twitch force potentiation (Klug et al., 1982; Manning and Stull, 1982; Moore and Stull, 1984; Vandenboom et al., 1997). Indeed, more recent studies using mouse extensor digitorum longus (EDL) muscle devoid of the enzymatic apparatus for phosphorylating the RLC show that, although posttetanic potentiation is completely absent, staircase potentiation, the gradual increase noted in isometric twitch force during low frequency stimulation, was still evident albeit reduced compared with wild-type responses (Zhi et al., 2005; Gittings et al., 2011). Thus, although a universal mechanism is often assumed, evidence exists to suggest that alterations in the Ca2+ signal delivered to the myofilament proteins may account for some aspects of potentiation phenomena. This conclusion is in fact consistent with results from rat hind limb disuse models demonstrating staircase potentiation when RLC phosphorylation is absent or reduced (Rassier et al., 1999; MacIntosh et al., 2008).
Although a myosin RLC phosphorylation-mediated increase in the Ca2+ sensitivity of force development may be the prevalent mechanism, few studies have examined the contribution of altered Ca2+ signals on twitch force potentiation. Thus, the purpose of this study was to assess how stimulation-induced alterations to ECC may contribute to potentiation using the mouse lumbrical muscle model (in vitro at 37°C). To this end, lumbrical muscles were loaded with either a high or low affinity Ca2+-sensitive fluorescent indicator to determine resting and peak intracellular cytosolic free Ca2+ concentration ([Ca2+]i), respectively, before and after a tetanic stimulus that potentiated the twitch contractions. We hypothesized that the mechanism for this persistent twitch force potentiation is the influence of repetitive stimulation on either resting or peak [Ca2+]i. Immunofluorescence and immunohistochemical characterization of the mouse lumbrical provide a comprehensive model with far-reaching implications for understanding this fundamental property of mammalian fast-twitch skeletal muscle.
MATERIALS AND METHODS
All procedures used in this study received ethical approval from the University of Waterloo Committee for Animal Care as well as from the Brock University Animal Care and Use Committee. The basic methods and procedure for obtaining and mounting lumbrical muscles were based on those described by Claflin and Brooks (2008). Adult male C57BL/6 mice (28.0 ± 0.6 g) (The Jackson Laboratory) were killed by cervical dislocation, after which the hind paws were removed and placed in a dish containing a Tyrode’s dissecting solution (mM: 136.5 NaCl, 5.0 KCl, 11.9 NaHCO3, 1.8 CaCl2, 0.40 NaH2PO4, 0.10 EDTA, and 0.50 MgCl2, pH 7.5; on ice), and the lumbrical muscles from both hind paws were subsequently removed. Isolated muscles were suspended horizontally between the arms of a high speed length controller (model 322C; Aurora Scientific Inc.) and a force transducer (model 400A; Aurora Scientific Inc.) while immersed in an oxygenated Tyrode’s experimental solution (mM: 121.0 NaCl, 5.0 KCl, 24.0 NaHCO3, 1.8 CaCl2, 0.40 NaH2PO, 5.50 glucose, 0.10 EDTA, and 0.50 MgCl2, pH 7.3). Based on the binding affinity of EDTA to the constituent metal ions, free concentrations of Ca2+ and Mg2+ were estimated at 1.7 and 0.5 mM, respectively, in the Tyrode’s solutions. Bath temperature was maintained at 37°C throughout the experiment. 0.2-ms stimulus pulses were delivered via imbedded platinum plate field stimulus electrodes using a stimulator (model 701C; Aurora Scientific Inc.). The stimulus voltage at which twitch force plateaued was found and then increased to 1.25 times this level for the duration of each experiment on each muscle. After a 15-min equilibration period, muscles were set to optimal length (Lo) for isometric twitch force development using a software-controlled procedure. Force data were collected online at 10,000 Hz and stored for analysis. Emitted fluorescence signals were collected by a microscope photometer system (D-104; Photon Technology International) affixed with photomultiplier tubes (PMTs; model 814; Photon Technology International) in analogue mode at 10,000 Hz and stored for subsequent analysis.
Experimental model and protocol
The mouse lumbrical muscle model has been used previously to study ECC (e.g., Månsson et al., 1989; Wang and Kerrick, 2002; Claflin and Brooks, 2008). A key advantage is that, in addition to providing a stable preparation for study at high temperatures (Barclay, 2005), the small size of the lumbrical makes it highly amenable to loading with membrane-permeant acetoxymethyl (AM) forms of dyes. The principal measurements of [Ca2+]i reported in this study were made using the excitation-shifted ratioable fluorescent indicators furaptra and fura-2, although a subset of experiments was performed using the emission-shifted ratioable fluorescent indicator indo-1 (Molecular Probes). Loading of AM-furaptra or AM–fura-2 was accomplished by soaking mounted muscles in ∼1 ml Tyrode’s experimental solution containing 20 µM dye for 60 min at 32°C, replacing the solution after 30 min. After 60 min of loading, the dye-containing solution was washed out several times and ultimately replaced with normal Tyrode’s experimental solution, and the temperature was raised to 37°C. Background fluorescence was obtained before and after loading to verify adequate dye loading and to control for the contribution of autofluorescence to records (i.e., subtracted from all subsequent records).
The timeline and experimental procedure for assessing [Ca2+]i during potentiation is shown schematically in Fig. 1. After dye loading and preliminary procedures were completed, the muscles received a single stimulus pulse every 30 s until a steady-state isometric twitch force was repeatedly observed. The fluorescence ratio representing resting or peak [Ca2+]i in the unpotentiated state was obtained from the last three twitches in this series. The regular interval of stimulus pacing was then stopped, and a potentiating stimulus (PS) consisting of 20 Hz for 2.5 s was applied. Thereafter, all muscles received single stimulus pulses to elicit potentiated twitches at 2.5, 5, 7.5, 10, 20, and 30 s after PS. Additional twitches were elicited at 30-s intervals over the next 3 min, a time sufficient to dissipate all potentiation before the protocol was repeated. Each of these repeat sequences took ∼5 min to complete and were performed eight times per muscle.
Fluorescent data collection
The excitation and emission light path for the main set of experiments is shown in Fig. 2. The muscle chamber was mounted on the stage of an inverted microscope (Axiovert 200; Carl Zeiss) fitted with a 20× objective (NA of 0.40 and WD of 1.5 mm; LD Plan-Neofluar; Carl Zeiss). Excitation light from the monochromator (Photon Technology International) was deflected by a dichroic beam splitter (415 nm; DCLP; Omega Optical, Inc.) housed in a filter cube in the base of the microscope before being focused on the muscle via the objective. Fluorescent light emitted from the muscle was collected by the objective and passed through the DCLP to an emission filter (510 nm; WB40; Omega Optical, Inc.) before deflection toward and detection by a PMT housed within a detection system (D-104; Photon Technology International). The analogue mode was used for all experiments, and the PMT was set to 600–800-V gain with a time constant of 0.5 ms for furaptra and 5.0 ms for fura-2. Excitation light was monitored in each experiment via a beam-splitting mirror housed within the monochromator, collected using a PMT and stored for later correction of variability of the excitation light caused by room vibrations and/or electrical instabilities.
Fluorescent dye properties
Each of the excitation- and emission-shifted dyes used in these experiments has been widely used to study [Ca2+]i in both amphibian and mammalian muscle fibers (Konishi et al., 1991, 1993; Westerblad and Allen, 1993; Claflin et al., 1994; Hollingworth et al., 1996, 2012; Morgan et al., 1997; Zhao et al., 1997; Vandenboom et al., 1998; Baylor and Hollingworth, 2003, 2012). Although both furaptra and fura-2 share the same chromophore, i.e., excitation at 344 and/or 380 nm and emission at 510 nm, the characteristics of the emitted fluorescence intensity at different [Ca2+]i vary considerably between these two dye types; fura-2 fluorescence change is most sensitive to low [Ca2+]i, whereas furaptra fluorescence change is most sensitive to higher [Ca2+]i. These properties are reflected by in vitro Kd values of 224 nM and 44 µM, respectively (Grynkiewicz et al., 1985; Raju et al., 1989; Konishi et al., 1991). This feature allows low affinity dyes such as furaptra to precisely track, with high fidelity, the amplitude and dynamics of the intracellular Ca2+ transient (ICT) at most temperatures (e.g., Claflin et al., 1994; Baylor and Hollingworth, 2000). On the other hand, our use of fura-loaded lumbricals to track basal [Ca2+]i avoids the limitations of furaptra for this purpose and provides a comparison point to previous work. The emitted fluorescence characteristics of indo-1 to different [Ca2+]i resemble that of fura -2 (Westerblad and Allen, 1993). For all dyes, the ratio technique minimizes contamination of the signal of interest by factors such as motion artifact and/or loss of dye or dye signal by bleaching (see Morgan et al., 1997; Baylor and Hollingworth, 2000, 2011). We tested this assumption by applying sinusoidal length changes to muscles during fluorescent light collection and found no evidence of fiber motion in the resulting ratio signals (not depicted).
Parallel experiments were performed in which no contractile or fluorescent data were collected to obtain RLC phosphate content of lumbrical muscles in the unpotentiated and potentiated states. Muscles were quick frozen in liquid nitrogen ∼30 s before and 2.5 s after the PS. All samples were stored at −80°C until they were packed on dry ice and shipped to the laboratory of J. Stull (University of Texas, Southwestern Medical Center, Dallas, TX) for quantification of RLC phosphorylation. Details regarding these methods and procedures have been presented elsewhere (Ryder et al., 2007; Xeni et al., 2011).
MYPT2 and skMLCK content of mouse muscles
Lumbrical, soleus, and EDL muscles were harvested from the mouse hind limb for determination of skeletal myosin light chain kinase (skMLCK) and myosin phosphatase targeting subunit 2 (MYPT2) content as described in Smith et al. (2010). In brief, skMLCK and MYPT2 content was assessed in whole muscle homogenates by Western blot analysis after separation of proteins by electrophoresis using 7.5% polyacrylamide gels and standard SDS/PAGE protocols (Laemmli, 1970). Protein concentrations were determined by the bicinchoninic acid method (Sigma-Aldrich), and Ponceau S (BioShop Canada Inc.) staining was used to control for variation in well loading. Either 8.0 (MYPT2) or 10.0 (skMLCK) µg of total protein was loaded for each muscle sample, with two mice per gel. A linear relationship between band density and protein load for each mouse was established for 2.0–8.0 µg of total protein in soleus for MYPT2 or 2.5–10.0 µg of total protein in EDL for skMLCK. After transfer of proteins to polyvinyl difluoride membranes, MYPT2 was probed using a polyclonal rabbit antibody, whereas skMLCK was probed using a polyclonal goat antibody (provided by J. Stull). Secondary probing was performed with either goat anti–rabbit (MYPT2) or donkey anti–goat (skMLCK) antibodies conjugated with horseradish peroxidase (HRP). Quantification was performed using an HRP substrate detection kit (Luminata; EMD Millipore) and subsequent densitometric analysis (GE Healthcare). MYPT2 content in EDL and lumbrical was expressed relative to soleus, whereas skMLCK content in soleus and lumbrical was expressed relative to EDL, as determined by comparing the band densities to those determined by the generated linear scales at equivalent protein loads.
Myosin heavy chain (MHC) expression was determined in lumbrical, soleus, and EDL cross sections by immunofluorescence analysis as described by Bloemberg and Quadrilatero (2012). In brief, sections were blocked with 10% goat serum, incubated with primary antibodies against MHC I, MHC IIa, and MHC IIb (Developmental Studies Hybridoma Bank), and then washed in PBS. Sections were then incubated with isotype-specific Alexa Fluor 350 anti–mouse, Alexa Fluor 488 anti–mouse, and Alexa Fluor 555 anti–mouse (Molecular Probes) secondary antibodies, washed in PBS, and mounted with an anti-fade reagent (Prolong Gold; Molecular Probes). This staining procedure allowed for the identification of type I (blue), type IIA (green), type IIB (red), type IIX (unstained), and hybrid (types I/IIA, IIAX, and IIXB) fibers. Type I/IIA hybrid fibers were identified as those staining positively for MHC type I and type IIa. Type IIAX fibers were identified as those staining positive for MHC IIa but at a lower intensity than fibers identified as type IIA. Similarly, fibers were labeled type IIXB if they stained positively for MHC IIb but at a lower intensity than type IIB fibers. Images were captured using a structured illumination fluorescent microscope (Axio Observer Z1) equipped with a camera (AxioCam HRm) and associated software (AxioVision; all from Carl Zeiss).
All data are reported as mean ± SEM. Relative changes in mean values for various twitch force and Ca2+ parameters were compared by a repeated measures ANOVA followed by Tukey’s HSD post-hoc analysis. Differences were considered significant at P < 0.05.
We present mechanical, immunofluorescence, and immunohistochemical data that describes a fast-twitch muscle model that appears to be somewhat unique in that isometric twitch force potentiation occurs in the total absence of myosin RLC phosphorylation. Although fast muscles from skMLCK knockout mice display a small amount of potentiation in the absence of stimulation-induced elevations in RLC phosphorylation, lumbrical muscles from wild-type mice appear to mimic this response. Thus, unlike traditional studies performed on wild-type muscles, this attribute of the lumbrical allows for a direct analysis of the contribution of altered [Ca2+]i to potentiation.
Isometric twitch contractile responses
Representative isometric twitch force records obtained before and after the PS are depicted in Fig. 3 A. These records show how stimulation produced a modest twitch potentiation that dissipated rapidly. Absolute mechanical data characterizing our mouse lumbrical in vitro muscle model are compiled in Table 1, with relative changes to twitch force amplitude and kinetics summarized in Fig. 3 (B–D). The PS produced a maximal increase in isometric twitch force of 17 ± 3% when determined 2.5 s after the cessation of stimulation (n = 10; P < 0.01). From this point onwards, potentiation decreased in a monotonic fashion with a halftime of ∼10 s; as a result, twitch force returned to prestimulus unpotentiated levels by 30 s. Along with the elevations in twitch force, twitch time course kinetics were faster and maximal rates of force production and relaxation were higher after the PS (Table 1). Interestingly, these effects were still evident 30 s later, despite the fact that twitch force had returned to pre-PS levels (Table 1); this effect resolved before the subsequent set of contractions. Finally, force returned to baseline in the time period between potentiated twitches (as depicted in the force traces of Figs. 3 and 5), and there was no latent elevation in baseline tension after the PS (not depicted).
An important limitation of fura-based fluorescence ratio signals is that they cannot provide quantitatively useful data regarding the amplitude or kinetic characteristics of the ICT. By the same token, furaptra-based fluorescence ratio signals cannot be expected to provide quantitatively useful data regarding resting [Ca2+]i (Baylor and Hollingworth, 2000, 2011). Thus, a complementary approach using both dyes was adopted to provide a more comprehensive picture regarding the influence of prior stimulation on ECC that could account for changes in isometric twitch force and kinetics. Ratio data from all experiments using either fura-2 or furaptra are compiled in Table 2. Averaged fura-2 fluorescence ratio records are shown in Fig. 4 A, with relative changes summarizing all experiments shown in Fig. 4 B. These data clearly show a relatively small but consistent elevation in basal [Ca2+]i that was highly significant (n = 10; P < 0.001) at all potentiation time points. By 30 s after stimulation, the resting fluorescence ratio was still elevated although potentiation had dissipated. Resting fluorescence did, however, return to prestimulus (unpotentiated) levels after another 30 s (i.e., within 60 s of completion of the PS). Virtually identical experiments (n = 8) were performed using the indicator indo-1, which has similar Ca2+ affinity as fura-2. In these experiments, there was an 8.1 ± 1.3% increase in the resting fluorescence ratio as determined 2.5 s after the PS (P < 0.001 vs. prestimulus). This increase dissipated with a similar time course as did the twitch force potentiation, returning to prestimulus levels by 30 s after the PS (not depicted). Thus, the elevation in resting [Ca2+]i reported by indo-1 fluorescence was quantitatively similar to that reported by fura-2 fluorescence in terms of both magnitude and duration.
Averaged furaptra-based fluorescence ratio signals from identical experiments are shown in Fig. 5, with relative changes for ICT amplitude and full width at half-maximum shown in Table 2, respectively. These data clearly show that, even when measured at the potentiation peak 2.5 s after stimulation, neither the amplitude nor the time course of the ICT was altered relative to the unpotentiated state (n = 10; P > 0.20). Although our fura- and furaptra-based fluorescence ratio signals have been analyzed independently of one another, our results indicate that stimulation-induced elevations in resting [Ca2+]i potentiate isometric twitch force in the complete absence of change to either the amplitude or time course of the subsequent ICT per se.
Myosin RLC phosphorylation, skMLCK, and MYPT2 content
Myosin RLC phosphorylation levels obtained from lumbrical and from EDL muscles are shown in Fig. 6 (A and B). An unexpected result was the complete absence of RLC phosphorylation in lumbrical muscles, as no phosphorylated RLC was detected in samples obtained before or after stimulation. On the other hand, phosphorylated RLC was detected in EDL samples obtained at rest and after stimulation. Consistent with these data was our Western blot analysis showing much lower expression of skMLCK and much higher expression of MYPT2 phosphatase in lumbrical muscle compared with EDL muscle (Fig. 6, C and D). Interesting in this regard was the similarity between soleus and lumbrical levels in both skMLCK and MYPT2 expression.
Fig. 7 compares the fiber-type composition of lumbrical, EDL, and soleus muscles from adult mice aged 3–5 mo, as determined by immunofluorescence analysis of the myosin isoform (as in Gittings et al., 2011). These data show that the main fiber types contained by adult mouse lumbrical muscle are type IIX and associated hybrids (i.e., type IIAX and type IIXB), comprising ∼61% of all fiber types. Notably, only a very small population of type IIB fibers was found. The total fiber count per lumbrical was 302 ± 17 muscle fibers (i.e., ∼40% of that in either soleus or EDL).
The purpose of this study was to establish if the isometric twitch force potentiation observed in mouse lumbrical muscle could be attributed to stimulation-induced changes in myoplasmic free Ca2+ concentration, as opposed to putative increases in Ca2+ sensitivity as mediated by RLC phosphorylation. The rationale for this line of inquiry was the presence of potentiation in skMLCK knockout muscles, suggesting at least a minor role for altered ECC in potentiation. By using a fast-twitch muscle that has little or no skMLCK expression (Ryder et al., 2007), we were able to examine potentiation in the absence of the RLC phosphorylation mechanism. The main finding in the present study was the presence of a small and rapidly dissipating potentiation temporally correlated with stimulation-induced elevations in resting [Ca2+]i, independent of change to the ICT itself, thus providing evidence for an alternate mechanism for the activity-dependent increases in twitch force often observed in fast-twitch muscle models. Thus, our data suggest the presence of stimulation-induced alterations to Ca2+ handling that acutely increases isometric twitch force, a mechanism that may operate independently of the longer term potentiation offered by skMLCK-catalyzed RLC phosphorylation (see Stull et al., 2011).
The mouse lumbrical at 37°C represents a relatively unique model with which to study force potentiation, making it difficult to make direct comparisons of our results with the literature. Although comprised of ∼89% of type II fibers, no phosphorylated RLC was detected in our samples either at rest or after stimulation. Although the absence of RLC phosphorylation and the minimal potentiation we observed seems incompatible with the typical rodent fast-twitch muscle profile (Schiaffino and Reggiani, 2011), our Western blot analysis, showing low skMLCK and high MYPT2 phosphatase expression in lumbrical relative to EDL muscle, corroborates the absence of detectable RLC phosphorylation in our experiments. As a general point of comparison, the potentiation of mouse EDL muscle at 35°C reported by Moore et al. (1990) was approximately twice as great in magnitude and duration as we observed. The difference in potentiation between the two studies is perhaps accounted for by the fact that, in their study, stimulation at 5 Hz for 20 s significantly elevated RLC phosphorylation levels. Interesting results from Ryder et al. (2007) may also apply to our experiments. These investigators used transgenic mice overexpressing the skMLCK enzyme in skeletal muscle to show that despite similar levels for RLC phosphorylation (i.e., 50–60% phosphorylated), twitch force potentiation was much greater in EDL than in soleus muscles (Ryder et al., 2007). This apparent uncoupling between RLC phosphorylation and twitch potentiation was hypothesized to be caused by the presence of type I and IIA fibers and the absence of type IIB fibers in soleus relative to EDL muscle; these data thus indicate a strong dependence within species fiber type for the ability of RLC phosphorylation to increase Ca2+ sensitivity (Ryder et al., 2007). Indeed, our work extends these data by showing that, in the wild-type mouse, skMLCK-catalyzed RLC phosphorylation may be restricted to IIB fibers with little RLC phosphorylation occurring in either IIX or IIA fibers. The relatively minor population of type IIB fibers we found in the lumbrical helps account for the low overall skMLCK expression in this muscle. Moreover, although we could not identify any fiber-type dependence for MYPT2 expression, the relatively high expression of MYPT2 suggests a limited ability to phosphorylate the RLC despite the prevalence of fast fibers.
Putative potentiation mechanism
Any adequate explanation for our results must account for an increased twitch force in the absence of any myosin RLC phosphorylation–mediated increase in Ca2+ sensitivity. Although our data does not provide any mechanistic insights, the finding of an unchanged ICT amplitude superimposed upon an elevated basal [Ca2+]i suggests that the Ca2+ activation of the thin filament may have been increased after stimulation. As pointed out by Baylor and Hollingworth (2011), little is known regarding the aftereffects of tetanic stimulation on basal [Ca2+]i. Because this parameter was elevated for as long as potentiation was observed (i.e., 20–30 s) and was reversed shortly thereafter (i.e., 30–60 s), we hypothesize that this change was mechanistically related to twitch force enhancement. One way in which an elevated basal [Ca2+]i could have directly potentiated twitch force is through an increased binding and, thus, occupancy of the intracellular Ca2+ buffer protein parvalbumin in resting muscle. In this hypothesis, although basal [Ca2+]i was not elevated above the threshold level for force development, partial saturation of parvalbumin-buffering capacity may have increased the fraction of free Ca2+ released from the sarcoplasmic reticulum that was able to bind to TnC on the thin filament, an effect not reflected by changes to the ICT itself. Indeed, the increased +dF/dt of potentiated twitches is consistent with an enhanced Ca2+ occupancy of TnC at the onset of contraction (Lee et al., 2010). An alternate interpretation of our results is that the increase in basal [Ca2+]i indirectly potentiated twitch force via some influence on thick filament distribution and/or structure. As an example, Brenner et al. (1982) used permeabilized rabbit psoas skeletal fibers to show the presence of a population of attached but non-force–generating cross-bridges at low ionic strength in the absence of Ca2+. Further to this, Lehrer (2011) has recently proposed the existence of a regulated cross-bridge state that is sensitive to resting or subthreshold levels of [Ca2+]i. Collectively, these studies seem to allow for the possibility that elevations in basal [Ca2+]i may promote the transition of the attached but pre-force–generating cross-bridge state to the attached and force-generating cross-bridge state during the twitch (Brenner et al., 1982; Lehrer, 2011). A final possibility worth considering is that elevations in basal [Ca2+]i potentiate twitch force by increasing the occupancy of Ca2+/Mg2+-binding sites located on the RLC (Bagshaw and Reed, 1977; Robertson et al., 1981). Ca2+ binding to myosin has been shown to disorganize myosin head position on the thick filament surface of scallop muscle (e.g., Zhao and Craig, 2003, 2008). If this effect of ligand binding to the myosin RLC has the same effect on thin filament–regulated vertebrate skeletal muscle as it does for thick filament–regulated molluscan muscle, it may facilitate the ability of cycling cross-bridges to attain force-generating states (Diffee et al., 1995, 1996). Thus, although our data cannot rule out alternate mechanisms related to changes in metabolites brought about by stimulation (e.g., Pi) (Barclay, 1992), they may be adequately accounted for by the influence of altered basal Ca2+ homeostasis in resting muscle on cross-bridge structure and/or distribution.
Relation to previous studies
Decostre et al. (2000) tracked fluorescence signals from the surface of mouse EDL muscles loaded with fura-2 (20°C) during posttetanic potentiation. These investigators observed an ∼10% increase in isometric twitch force immediately after stimulation at 125 Hz for 1 s, a potentiation that then decayed slowly and was absent 300 s later. Consistent with our results, however, elevations in basal and peak [Ca2+]i were observed, although the absolute change in ICT amplitude was similar in potentiated versus unpotentiated states (Decostre et al., 2000). Interestingly, the application of 1 µM adrenaline to maintain post-stimulus elevations in myosin RLC phosphate content produced a greater and more prolonged potentiation of twitch force (10–15% for >300 s) that was evident after the stimulation-induced alterations in [Ca2+]i had been reversed. This outcome suggests that, although stimulation-induced elevations in [Ca2+]i may contribute, they are not a requisite for twitch force potentiation. This helps account for why rat fast-twitch muscle models displaying reduced RLC phosphorylation also exhibit reduced potentiation (Tubman et al., 1996, 1997). Based on these and the present results, stimulation-induced elevations in resting [Ca2+]i and in RLC phosphorylation may provide an acute and persistent twitch force potentiation, reversed by the rapid return of resting Ca2+ homeostasis and/or the slow rate of RLC dephosphorylation by PP1 phosphatase activity, respectively (Stull et al., 2011).
The advantages and disadvantages of using high and low Ca2+ affinity indicators for determination of [Ca2+]i in intact skeletal fibers have recently been presented by Baylor and Hollingworth (2011). Although use of AM dyes offers many advantages, an intractable issue is that of a noncytosolic-specific compartment component to the global fluorescent signal (see Morgan et al., 1997). Thus, although we have assumed that the loci for the elevated resting [Ca2+]i was the myoplasm, this cannot be absolutely confirmed from the present experiments. In addition, although furaptra retains the ability to precisely track the ICT in the range of 28 to 35°C (Hollingworth et al., 1996), it is possible that the high temperature we used may have mitigated our ability to detect changes in ICT duration caused by the PS.
Our results provide a putative mechanism for posttetanic potentiation of isometric twitch force reported in the absence of myosin RLC phosphorylation. Although the skMLCK-catalyzed phosphorylation of the myosin RLC should still be considered the primary mechanism, repetitive or high frequency stimulation that elevates resting [Ca2+]i may contribute a fast-acting component to isometric twitch force potentiation, reversed by the rapid return of Ca2+ homeostasis after stimulation. The functional implications of this mechanism remain to be determined.
We would like to thank Dr. Jim Stull for analysis of myosin light chain phosphorylation.
This study was supported by funds provided by the Natural Sciences and Engineering Research Council of Canada (to A.R. Tupling and R. Vandenboom). The authors declare that they do not have any conflicting interests regarding the findings or interpretations of this manuscript.
Angus C. Nairn served as editor.
- Abbreviations used in this paper:
- intracellular cytosolic free Ca2+ concentration
- excitation–contraction coupling
- extensor digitorum longus
- intracellular Ca2+ transient
- myosin heavy chain
- myosin phosphatase targeting subunit 2
- potentiating stimulus
- regulatory light chain
- skeletal myosin light chain kinase
- Submitted: 22 October 2012
- Accepted: 17 January 2013
This article is distributed under the terms of an Attribution–Noncommercial–Share Alike–No Mirror Sites license for the first six months after the publication date (see http://www.rupress.org/terms). After six months it is available under a Creative Commons License (Attribution–Noncommercial–Share Alike 3.0 Unported license, as described at http://creativecommons.org/licenses/by-nc-sa/3.0/).