Alternative splicing of the skeletal muscle CaV1.1 voltage-gated calcium channel gives rise to two channel variants with very different gating properties. The currents of both channels activate slowly; however, insertion of exon 29 in the adult splice variant CaV1.1a causes an ∼30-mV right shift in the voltage dependence of activation. Existing evidence suggests that the S3–S4 linker in repeat IV (containing exon 29) regulates voltage sensitivity in this voltage-sensing domain (VSD) by modulating interactions between the adjacent transmembrane segments IVS3 and IVS4. However, activation kinetics are thought to be determined by corresponding structures in repeat I. Here, we use patch-clamp analysis of dysgenic (CaV1.1 null) myotubes reconstituted with CaV1.1 mutants and chimeras to identify the specific roles of these regions in regulating channel gating properties. Using site-directed mutagenesis, we demonstrate that the structure and/or hydrophobicity of the IVS3–S4 linker is critical for regulating voltage sensitivity in the IV VSD, but by itself cannot modulate voltage sensitivity in the I VSD. Swapping sequence domains between the I and the IV VSDs reveals that IVS4 plus the IVS3–S4 linker is sufficient to confer CaV1.1a-like voltage dependence to the I VSD and that the IS3–S4 linker plus IS4 is sufficient to transfer CaV1.1e-like voltage dependence to the IV VSD. Any mismatch of transmembrane helices S3 and S4 from the I and IV VSDs causes a right shift of voltage sensitivity, indicating that regulation of voltage sensitivity by the IVS3–S4 linker requires specific interaction of IVS4 with its corresponding IVS3 segment. In contrast, slow current kinetics are perturbed by any heterologous sequences inserted into the I VSD and cannot be transferred by moving VSD I sequences to VSD IV. Thus, CaV1.1 calcium channels are organized in a modular manner, and control of voltage sensitivity and activation kinetics is accomplished by specific molecular mechanisms within the IV and I VSDs, respectively.
Voltage-gated calcium channels (CaV’s) control numerous important functions of excitable cells, including muscle contraction, hormone and neurotransmitter secretion, and activity-dependent gene regulation. According to this variety of cell functions, the different CaV isoforms and splice variants greatly vary in their voltage dependence and current kinetics (Lipscombe et al., 2013). Of all the CaV isoforms, the adult splice variant of the skeletal muscle calcium channel (CaV1.1a) has the most depolarized voltage dependence and the slowest current kinetics. In contrast, the embryonic splice variant CaV1.1e, which lacks the alternatively spliced exon 29, activates at much less depolarized membrane potentials (Tuluc et al., 2009).
In skeletal muscle, CaV1.1 primarily functions as the voltage sensor of excitation-contraction (EC) coupling (Melzer et al., 1995). For this signaling process, calcium influx through the CaV1.1 channel is dispensable, and it is questionable whether in the duration of a brief skeletal muscle action potential calcium influx through CaV1.1a is activated at all (Armstrong et al., 1972; Rios and Brum, 1987). In fact, calcium influx during skeletal muscle EC coupling may even be harmful, as aberrant expression of the embryonic, calcium-conducting CaV1.1e isoform in adult mice and humans is linked to muscle weakness and disease (Tang et al., 2012; Santoro et al., 2014; Sultana et al., 2016). Therefore, the molecular mechanisms regulating calcium currents in CaV1.1 are of high physiological and pathological importance.
The pore-forming CaV α1 subunits are the product of a single gene composed of four homologous repeats (I–IV), each containing six transmembrane helices (S1–S6; Catterall, 2011). S5, S6, and the connecting pore loop of the four repeats together comprise the channel pore with the selectivity filter and the activation gate. S1 through S4 of each repeat make up the voltage-sensing domains (VSDs). The S4 helices contain four to five positive charges (arginines and lysines) that in response to membrane depolarization move across the membrane and thereby initiate the allosteric opening of the channel pore. In analogy with the more in-depth-studied VSDs of potassium and sodium channels, it is assumed that during the gating process the positively charged amino acids in S4 sequentially interact with two negatively charged (aspartate and glutamate) and one polar amino acid (phenylalanine) in the S2 and S3 helices, called the charge transfer center (Tao et al., 2010). The movement of these voltage sensors upon depolarization determines the activation properties of voltage-gated cation channels, and drugs interfering with the voltage sensor movement modify channel gating (Gur et al., 2011; Wang et al., 2011).
Recently, we discovered the molecular mechanism by which the voltage dependence of channel activation is regulated in CaV1.1 (Tuluc et al., 2016). Incorporation of the alternatively spliced exon 29 into the extracellular loop connecting transmembrane helices S3 and S4 of the IV VSD shifts the voltage dependence of activation by ∼30 mV in the depolarizing direction (Tuluc et al., 2009). This inhibiting action of exon 29 critically depends on the two outermost arginines (R1 and R2) in IVS4 and on an aspartate (D4) near the extracellular side of the IVS3 helix (Tuluc et al., 2016). Based on structure modeling and mutagenesis data, we proposed a model according to which transient interactions of R1 and R2 with the counter charge D4 are important for regular voltage sensing of the IV VSD of CaV1.1e, and inclusion of exon 29 in the IVS3–S4 linker in CaV1.1a somehow interferes with this interaction, causing the observed reduction of voltage sensitivity (Fig. 1 B).
Here, we used site-directed mutagenesis and domain swapping between the I and IV VSDs to address the question as to whether exon 29 by itself has the potential of curtailing CaV1.1 currents, whether the proposed D4–R1/R2 interaction is specific to the IV VSD or can also function in the I VSD, and how regulation of voltage dependence of activation relates to regulation of activation kinetics. Our results extend and refine our original model by demonstrating that IVS4 is fundamentally different from the voltage sensor in the I repeat, such that IVS4 critically requires the transient interactions with the additional counter charge D4. This sophistication of the IV VSD makes it receptive to modulation by alternative splicing of IVS3–S4 linker. However, neither the IVS3–S4 linker containing exon 29 nor the IVS3 helix containing D4 by themselves or together have the potential to regulate voltage dependence of activation. Moreover, our data demonstrate that regulation of voltage dependence and kinetics of current activation are spatially separated in the I and IV repeats, respectively, and are functionally independent of each other.
MATERIALS AND METHODS
The CaV1.1 channel chimeras were generated using splicing by overhang extension PCR into the GFP-α1S, GFP-α1S–ΔE29, or GFP-α1C plasmids previously described (Tuluc et al., 2007, 2009) and verified by sequencing performed by Eurofins Genomis. For the chimeras where sequences of the IV VSD were transferred into the I VSD, a three-fragment PCR was generated with flanking primers downstream of the SalI enzyme restriction site and upstream of the EcoRI restriction site. The obtained PCR fragments were cloned into the GFP-α1S–ΔE29-containing plasmid using SalI and EcoRI restriction sites. The same restriction sites were used to clone the cardiac S3 and S3–S4 linker into CaV1.1a or CaV1.1e variants. For the chimeras containing sequences of the I repeat in the IV repeat or for the CaV1.1a-L1212/L1215N chimera, a three-fragment PCR or two-fragment PCR, respectively, was generated with the flanking primers upstream of the XhoI site and downstream of the BglII site. The same sites were used to clone the obtained PCR fragment into the GFP-α1S– or GFP-α1S–ΔE29-containing plasmids. Table S1 contains the full list of the cloning primers used to generate the PCR fragments.
Myotube cell culture and transfection
Myoblasts of the dysgenic (mdg/mdg) cell line GLT were transfected 4 d after plating using FuGENE-HD transfection reagent (Roche). Transfected myotubes, identified by GFP fluorescence, were analyzed between 8 and 10 d in culture (Tuluc et al., 2007). GLT myotubes endogenously express the auxiliary α2δ-1, β1a, and γ1 calcium channel subunits as well as STAC3 and the ryanodine receptor, enabling proper functional incorporation of the channel constructs in the triad junction (Rios and Brum, 1987; Tanabe et al., 1988; Flucher et al., 2005).
Electrophysiology and data analysis
Calcium currents were recorded with the ruptured whole-cell patch-clamp technique in voltage-clamp mode using an Axopatch 200B amplifier (Axon Instruments). Patch pipettes (borosilicate glass; Harvard Apparatus) were filled with (mM) 145 Cs-aspartate, 2 MgCl2, 10 HEPES, 0.1 Cs-EGTA, and 2 Mg-ATP (pH 7.4 with CsOH) and had a resistance between 1.5 and 3 MΩ. For the recording of the calcium currents, the myotubes were bathed in solution containing (mM) 10 CaCl2, 145 tetraethylammonium chloride, and 10 HEPES (pH 7.4 with tetraethylammonium hydroxide). Data acquisition and command potentials were controlled by pCLAMP software (version 8.0; Axon Instruments); analysis was performed using Clampfit 8.0 (Axon Instruments) and SigmaPlot 8.0 (SPSS Science) software. The current-voltage dependence was fitted according to where, Gmax is the maximum conductance of the L-type calcium currents, Vrev is the extrapolated reversal potential of the calcium current, V1/2 is the potential for half maximal conductance, and k is the slope. The conductance was calculated using and its voltage dependence was fitted according to a Boltzmann distribution: The statistical significance was calculated using the Mann–Whitney U test (see Tables 1 and 2).
Online supplemental material
Our supplemental material provides a figure (Fig. S1) displaying the relation between Ipeak and V1/2 of wild-type and mutated CaV1.1 channels and a table (Table S1) with the full list of the cloning primers used to generate the PCR fragments. Online supplemental material is available at http://www.jgp.org/cgi/content/full/jgp.201611568/DC1.
The structure of the IVS3–S4 linker is important for the control of voltage sensitivity and current density in CaV1.1a
Inclusion of the 19–amino acid sequence of exon 29 in the extracellular linker between transmembrane helices IVS3 and IVS4 shifts the channel voltage sensitivity of CaV1.1 by ∼30 mV in the depolarizing direction (Tuluc et al., 2009). Recently, we demonstrated that a hitherto unnoticed interaction of oppositely charged residues in IVS3 and IVS4 is the critical determinant of CaV1.1 voltage sensitivity and that alternative splicing of the IVS3–S4 linker modulates this interaction (Fig. 1, A and B; Tuluc et al., 2016). If the specific structure of the IVS3–S4 linker causes the relative displacement of the adjacent transmembrane helices and thus perturbs the D4–R1/R2 interaction, changes of its structure should exert strong effects on voltage sensitivity. This prediction was tested by simultaneously mutating two leucines in the middle of the CaV1.1a exon 29 to asparagine (L1212N and L1215N). Our original Rosetta models of the IVS3–S4 linker (Tuluc et al., 2016) and additional structure prediction tools (NPS@: Network Protein Sequence Analysis [Combet et al., 2000]) indicate that these leucines impart secondary structure (α-helix or β-sheet) and hydrophobicity to the extracellular loop, both of which are abolished by the double mutation (Fig. 1, A, C, and D).
This (CaV1.1a-L1212/1215N) mutant and all other CaV1.1 constructs analyzed in the present study were expressed in dysgenic (α1S null) myotubes of the GLT cell line (Powell et al., 1996). In these myotubes, CaV1.1 constructs are incorporated in functional channel complexes of triads and peripheral couplings and functionally reconstitute skeletal muscle EC coupling (Flucher et al., 2000; Kugler et al., 2004). An N-terminally fused eGFP aided in the selection of transfected myotubes for patch-clamp analysis. Transfected myotubes were voltage-clamped at a holding potential of −80 mV, and series of currents were recorded during 200-ms test pulses to potentials between −50 and 80 mV, increasing at 10-mV increments. Fig. 1 (E–G) shows representative current traces at the maximal test potential, the mean I-V curves, and the voltage dependence of fractional activation for the two splice variants (CaV1.1a and CaV1.1e) and for the CaV1.1a-L1212/1215N mutant. As previously demonstrated (Tuluc et al., 2009; Benedetti et al., 2015), the two wild-type variants differ in that the embryonic splice variant CaV1.1e lacking exon 29 activates at ∼30 mV less depolarizing potentials and conducts several-fold higher current densities compared with the adult/classical CaV1.1a. The different current densities were independent of membrane expression of the channels. Both the magnitudes of gating currents and of depolarization-induced calcium transients were identical in myotubes expressing either one of the CaV1.1 variants (Tuluc et al., 2009). Mutation of the two leucines in exon 29 (CaV1.1a-L1212/1215N) resulted in a 2.5-fold increase of current density and an 11.8-mV left shift of the voltage dependence of activation (P < 0.0001; Fig. 1, E–G; and Table 1). Therefore, interfering with the structure and hydrophobicity of the IVS3–S4 linker changed these gating properties in CaV1.1a approximately half way in the direction of the splice variant lacking exon 29 (CaV1.1e). In contrast, the double leucine mutation had little effect on activation kinetics. As in the two wild-type splice variants (CaV1.1a and CaV1.1e), current activation could best be fit with a double-exponential function (Caffrey, 1994; Avila and Dirksen, 2000; Obermair et al., 2005), and the time constants of the slow and fast components of CaV1.1a-L1212/1215N were similar to those of CaV1.1e (Fig. 1, H and I; and Table 2). Thus, mutation of leucines 1212 and 1215 in the IVS3–S4 linker of CaV1.1a qualitatively reproduces the effects on channel gating of exclusion of exon 29.
Control of voltage sensitivity and current amplitude can be transferred from the IV to the I VSD
To examine whether the IVS3–S4 linker including exon 29 by itself can modulate voltage sensitivity also in the context of a different VSD that does not contain the critical negatively charged amino acid (D4) in the transmembrane helix S3, we generated a channel chimera in which we inserted the IVS3–S4 linker including exon 29 into the corresponding position of the first repeat (Fig. 2 A). As this chimera was constructed in the background of the CaV1.1e splice variant, exon 29 is lacking in the IV, but instead is present in the I repeat (Fig. 2 B). If intrinsic features of the IVS3–S4 linker were sufficient to limit current activation, the current properties of this chimera would be shifted from those of CaV1.1e toward those of CaV1.1a, i.e., showing right-shifted voltage sensitivity of activation and reduced current amplitude. However, transferring the IVS3–-S4 linker sequence to repeat I of CaV1.1e (CaV1.1e-LI) resulted in rapidly activating and partially inactivating calcium currents with otherwise unaltered gating properties (Fig. 2 C). The mean amplitude of the early current peak was equal to that of the starting construct CaV1.1e (P = 0.2; Fig. 2 D), and most importantly, the voltage dependence of current activation was only minimally shifted relative to that of CaV1.1e (Fig. 2 E and Table 1). Half-maximal voltage of activation (V1/2) of CaV1.1e-LI was 11.7 ± 0.9 mV; that is only 5 mV from that of CaV1.1e (V1/2 = 6.7 ± 1.0 mV; P < 0.05) but more than −20 mV from that of CaV1.1a (34.8 ± 0.9 mV; P < 0.0001). Thus, the IVS3–S4 linker sequence, which regulates voltage sensitivity of the IV VSD, does not exert a modulatory action on the I VSD.
To further examine whether also in the context of the I VSD exon 29 requires the critical aspartate D4 in the S3 helix to exert its limiting effect on channel gating, we next transferred the IVS3–S4 linker together with the entire S3 transmembrane helix into the first repeat (CaV1.1e–CaV1.1e-3LI). Recording currents from myotubes expressing this construct showed that the voltage dependence of activation (V1/2 = 12.4 ± 1.4 mV; P < 0.0001) was only marginally right-shifted compared with the starting construct CaV1.1e (Fig. 2 E) but still more than −20 mV apart from CaV1.1a (P < 0.0001). This indicates that in the context of the I VSD D4–R1/R2 interactions are not critically involved in voltage sensor movement.
Finally, we transferred the IVS3–S4 linker together with the transmembrane helix S4 into the corresponding position of the I repeat (CaV1.1e-L4I). If the proposed D4–R1/R2 interaction depends on the specific properties of S4 from the IV VSD, then transferring it into the I VSD, which lacks D4, might impede the voltage sensor movement and consequently revert the current properties of CaV1.1e back to those of CaV1.1a. Indeed, the currents of this chimera (CaV1.1e-L4I) were small and activated only at much depolarized potentials (Fig. 2, C–E; and Table 1). The small current density of CaV1.1e-L4I, (0.6 ± 0.1 pA/pF) and the right-shifted voltage dependence of activation (V1/2 = 36.4 ± 3.1 mV) resembled those of CaV1.1a (P = 0.5), demonstrating that the limiting effects of the IV VSD can be fully transferred to the first repeat by transplanting the IVS3–S4 linker plus the adjacent IVS4 helix. The reduced current density was not caused by reduced functional membrane incorporation of CaV1.1e-L4I channels, as the amplitude of the depolarization-induced calcium transients was similar to that of CaV1.1a channels (not depicted).
Interestingly, the repeat IV to repeat I chimeras also affected the current kinetics. Whereas both wild-type splice variants (CaV1.1a and CaV1.1e) are slowly activating and activation of both is composed of a slow and a fast component, all three tested IV to I chimeras were rapidly activating. Their activating phase could be fitted with a single exponential function with the activation time constants resembling the fast component of the starting construct CaV1.1e (Fig. 2, F and G; and Table 2). The fact that the changes in activation kinetics, seen with all IV to I chimeras, do not parallel the changes in voltage dependence of activation, which was seen only in CaV1.1e-L4I, indicates that these activation properties are determined by independent channel structures.
Insertion of CaV1.2 sequences into the I VSD alters current kinetics without affecting voltage dependence of activation of both CaV1.1 splice variants
Previously, it has been shown that the specific slow activation kinetics of the skeletal muscle CaV1.1 can be transferred to the cardiac/neuronal CaV1.2 isoform by replacing the IS3 helix plus the IS3–S4 linker in CaV1.2 with those of CaV1.1 (Nakai et al., 1994). The opposite changes observed in all of our IV to I chimeras corroborate the importance of IS3, the IS3–S4 linker, and IS4 in determining activation kinetics of CaV1.1 channels. To examine whether determination of activation kinetics and voltage sensitivity are linked or independent of each other, we generated chimeras in which IS3 and the IS3–S4 linker of both CaV1.1 splice variants were replaced by the corresponding sequences of the rapidly activating CaV1.2 channel isoforms (CaV1.1a-CSI and CaV1.1e-CSI; Fig. 3, A and B). Indeed, this sequence exchange conferred fast (CaV1.2 like) activation kinetics onto CaV1.1a as well as onto CaV1.1e (Fig. 3 C and Table 2). Similar to the changes observed in the IV to I chimeras (compare with Fig. 2 [F and G]), both CaV1.1a-CSI and CaV1.1e-CSI displayed a single activation component equal to or faster than the fast activation component of the starting constructs CaV1.1a (P < 0.0001) and CaV1.1e (P = 0.6; Fig. 3, F and G; and Table 2). Importantly, the changes in activation kinetics were not accompanied by significant changes in voltage dependence of activation or of current density (Fig. 3, D and E). Although, both CaV1.1a-CSI and CaV1.1e-CSI activated rapidly, the ∼30-mV difference in voltage dependence of activation between the two CaV1.1 splice variants was still maintained (Table 1).
Transferring sequences from the I to the IV VSD modulates voltage dependence but not kinetics of activation
So far the results of this study are consistent with the notion that in CaV1.1 channels the I VSD controls mainly activation kinetics, whereas the IV VSD controls voltage dependence of activation and current density. Consequently, the individual VSDs of CaV1 channels appear to be functionally and structurally distinct modules, and at least for the voltage sensitivity this characteristic can be transferred between the repeats. If this is also the case for the kinetic properties, slow, two-component activation kinetics may be transferrable from the I to the IV VSD. To test this possibility, we chose as starting construct the chimera CaV1.1e-LI (Fig. 2 B) because it conducts sizeable calcium currents with fast, single-component activation kinetics (compare Fig. 2). Then we exchanged the corresponding sequences in repeat IV with the IS3–S4 linker alone (CaV1.1e-LI-LIV) or together with the IS3 helix (CaV1.1e-LI-3LIV), with the IS4 helix (CaV1.1e-LI-L4IV), or with both IS3 and IS4 helices (CaV1.1e-LI-3L4IV) of repeat I (Fig. 4, A and B). If any one of these I VSD sequences independently determines the characteristic skeletal muscle-like activation kinetics, we would expect chimeric channels to activate slowly with the activation kinetics described by a two-component exponential function like CaV1.1e or CaV1.1a.
The voltage sensitivities and current amplitudes of these constructs were rather diverse and occupied the full range between those of CaV1.1a and CaV1.1e (Fig. 4, C–E; and Table 1). Interestingly, inserting the IS3–S4 linker into the IV repeat (CaV1.1e-LI-LIV) reduced voltage sensitivity (V1/2 = 21.2 mV) and current density to intermediate levels (7.0 pA/pF). The characteristics of CaV1.1e-LI-LIV were very similar to those reported above for the CaV1.1a-L1212/1215N (compare with Fig. 2 [D and E] and Table 1). Apparently, either mutating the IVS3–S4 linker or replacing it by the corresponding linker of repeat I shifts the voltage dependence of activation to a similar degree, although in opposite directions. Thus, both alterations in the IVS3–S4 linker partially reproduce the effect of alternative splicing of exon 29 (see also Fig. S1). Inserting IS3 plus the IS3–S4 linker into the IV repeat (CaV1.1e-LI-3LIV) resulted in a current with small amplitude (2.1 pA/pF) and a right-shifted voltage dependence of activation (V1/2 = 36.1 mV), as expected for an S3 helix lacking D4. Both V1/2 and current amplitude of this construct CaV1.1e-LI-3LIV were equal to those of CaV1.1a (P = 0.4, P = 0.3). In contrast, insertion of the IS3–S4 linker plus IS4 into the IV repeat (CaV1.1e-LI-L4IV) resulted in currents with voltage dependence and current density like CaV1.1e (V1/2 = 5.2 mV, P = 0.4; Ipeak = 9.6 pA/pF, P = 0.5). Apparently, with a heterologous S4 segment from the I repeat, the IV VSD is no longer subject to modulation by D4 and the S3–S4 linker. Similarly, insertion of the entire sequence including IS3, the IS3–S4 linker, and IS4 (CaV1.1e-LI-3L4IV) did not change either voltage dependence of activation or the current amplitude (V1/2 = 10.6 mV, Ipeak = 8.7 pA/pF), suggesting that this module of the I VSD is functionally equivalent to that of the IV VSD without exon 29 (CaV1.1e; P = 0.4, P = 0.4).
Although voltage dependence of activation and current density were differentially affected by these I to IV sequence exchanges, none of these chimeras reproduced the slow, two-component activation kinetics of the wild-type CaV1.1 channels (Table 2). All I to IV chimeras activated rapidly, activation could be fit with a single exponential, and time constants were comparable with that of the starting chimera CaV1.1e-LI (Table 1). Apparently, the activation kinetics determined by the I VSD cannot be overcome by any of the tested insertions of repeat I sequences into the IV repeat.
Previously, we demonstrated that in the IV VSD the interaction between D4 (D1196) in IVS3 and R1 and R2 in IVS4 are critical for the voltage sensitivity of CaV1.1 calcium currents and that the alternatively spliced IVS3–S4 linker modulates this critical interaction so that the voltage dependence of current activation in the adult splice variant CaV1.1a is right-shifted by ∼30 mV compared with the embryonic CaV1.1e splice variant lacking exon 29 (Tuluc et al., 2016). Using point mutations and multiple channel chimeras in which we swapped sequence domains between the I and the IV VSD of CaV1.1, we demonstrate here that (a) mutation or substitution of the IVS3–S4 linker modulates the voltage sensitivity in the context of the IV VSD, whereas the IVS3–S4 linker has no modulatory activity of its own when inserted into the I VSD; (b) the transmembrane helix IVS4 is functionally distinct from IS4 in that it specifically requires the interaction with its corresponding IVS3 (containing D4), whereas IVS3 functions in both VSDs. Moreover, by analyzing current kinetics of the chimeras, we demonstrate that (c) IS3, the IS3–S4 linker, and IS4 are all necessary for slow, skeletal muscle type activation, but neither separately nor combined are these domains sufficient to effect slow activation in the context of the IV VSD.
The CaV1.1 IVS3–S4 linker specifically regulates voltage sensing in the IV VSD
Mutations in CaV1.1a expected to break the structure and alter the hydrophobicity of the IVS3–S4 linker improved the voltage sensitivity and increased the current density of CaV1.1a. Although this mutation did not completely reverse the limiting effect of exon 29 inclusion, this result strongly supports the notion that the structural integrity of the IVS3–S4 linker is important for its role in determining the characteristic gating properties of CaV1.1a. As mutation of the two leucines alters both the predicted structure (helix or β-sheet) and the hydrophobicity of the IVS3–S4 linker, we cannot say which of these properties is critical for modulating the voltage sensor. However, because the original length of the linker was maintained, we can exclude the alternative explanation that simply the length of the IVS3–S4 linker determines the voltage sensitivity of CaV channels. This is different from the situation in KV channels where the lengths of the loop alters the transition of the VSD (Priest et al., 2013) and from CaV1.2 channel splice variants where the length of the IVS3–S4 linker correlates with the voltage dependence of activation (Tang et al., 2004). Given the importance of the structure of the IVS3–S4 linker, this domain might be sufficient to perturb the movement of any VSD and thus cause the loss of voltage sensitivity. However, when inserted into the VSD of the I repeat, the IVS3–S4 linker had no effect on voltage sensitivity or current amplitude. This clearly demonstrates that the structural features of exon 29 are not sufficient to curtail voltage sensitivity in any VSD. Apparently, other unique features of the IV VSD are necessary for the IVS3–S4 linker to modulate the current properties.
The IV VSD but not the I VSD requires the D4–R1/R2 interaction
When we examined which additional structural domains are required to transfer right-shifted voltage sensitivity from the IV to the I VSD, it turned out that IVS4, but not IVS3, is needed in addition to the IVS3–S4 linker to precisely recapitulate the gating properties of CaV1.1a. In the reverse set of chimeras, IS3 plus the IS3–S4 linker, but not the IS3–S4 linker plus IS4, right-shifted the voltage sensitivity. Both chimeras that resulted in right-shifted V1/2 combine the S3 from the I VSD with S4 from the IV VSD, suggesting that this mismatch is the primary cause of the observed loss of voltage sensitivity. This mechanism is independent of exon 29 in the IVS3–S4 linker, as it also occurs with the IS3–S4 linker, which otherwise supports normal voltage sensing in both repeats. Interestingly, the opposite mismatch, S3 from the IV and S4 from the I VSD, did not perturb voltage sensing. This demonstrates that IVS4 specifically requires IVS3 for normal voltage sensitivity, but IVS3 functions perfectly well with the S4 helices from either VSDs.
Together with our previous discovery of the essential role of an intramolecular interaction of aspartate D4 in the IVS3 helix with the two outermost arginines (R1 and R2) in IVS4 (Tuluc et al., 2016), the current results suggest the following model for the regulation of voltage sensitivity in the CaV1.1 splice variants (Fig. 5). The S4 helix of the IV VSD is different from that of the I VSD in that it specifically and critically requires additional transient interactions with D4 in the IVS3 helix for effective voltage sensing. This interaction most likely facilitates the final transition and stabilization of the VSD in the activated state (Tuluc et al., 2016). At present, we do not know what exactly constitutes this difference in IVS4, but combining it with S3 helices lacking D4 consistently results in loss of voltage sensitivity. Although D4 in the S3 helix is of critical importance for the function of IVS4, in combination with IS4, the presence of D4 does not affect the voltage sensitivity. Thus, D4 functions exclusively as an essential partner for IVS4.
The dependence of the voltage sensor on this additional intramolecular interaction near the extracellular side of the IV VSD creates a mechanism enabling the modulation of the voltage dependence of activation by alternative splicing of the linker connecting the two participating transmembrane helices. When the relative position of IVS3 and IVS4 is altered by insertion of exon 29, voltage sensitivity is right-shifted by ∼30 mV. Consistent with this notion, mutation of exon 29 or replacing the entire linker with that of repeat I caused partial shifts in voltage dependence of activation. This also shows that this modulatory mechanism does not necessarily function as an all or none switch but can function in a graded manner. Our previous structure-function analysis of the IVS3–IVS4 interactions predicted the participation of multiple transient hydrogen bonds between D4 and the two outermost arginines R1 and R2 in the last transition and the subsequent stabilization of the voltage sensor in the activated state. Therefore, it is intriguing to speculate that the partial shift in voltage sensitivity observed here might be caused by the selective loss of one or two of these bonds while others might remain intact. A critical role of interaction between S3 and S4 helices in controlling the energetics of voltage sensor activation by stabilizing the activated state has also been shown for the Shaker K+ channel (Xu et al., 2013).
The kinetic properties of CaV1.1 activation are determined by the I VSD independently of the regulation of voltage sensitivity
Kinetic analysis of our channel chimeras is consistent with earlier results suggesting that the characteristics of CaV1.1 activation—very slow time course composed of two kinetic components—are determined by the VSD of the I repeat (Nakai et al., 1994). Transfer of the IS3 helix and the IS3–S4 linker from CaV1.2 into CaV1.1a and CaV1.1e gave rise to channel chimeras with fast, cardiac-like activation kinetics. But also any insertion into the I VSD of sequences from the IV VSD of CaV1.1 changed the activation kinetics in a similar way. This indicates that the changes of channel kinetics in the CaV1.1-CaV1.2 chimeras were not caused by a gain of CaV1.2 function but by a loss of the specific CaV1.1 function. Apparently, the specific kinetic properties of the I VSD of CaV1.1 are highly sensitive to any changes, be it from a different channel isoform or from a different VSD of the same channel isoform. This notion is further supported by the finding that, in contrast to the voltage dependence of activation, kinetic properties could not be transferred from one to another VSD of the same channel. This is surprising considering that transfer of the same sequences from CaV1.1 to CaV1.2 was sufficient to confer slow activation onto the cardiac/neuronal channel (Nakai et al., 1994). In contrast, this discrepancy further emphasizes the substantial difference of the VSD within a CaV1 channel. Apparently, the I VSDs of CaV1.1 and CaV1.2 share more functional similarities with one another than the I and IV VSD of CaV1.1.
Together, these results show that CaV1.1 is organized in a modular way so that specific VSDs control distinct properties of L-type calcium current activation. Distinct contributions of the different VSDs to channel gating have previously been described for NaV1.2a VSDs transplanted into the KV2.1 channel (Bosmans et al., 2008). In our study, we demonstrate that repeat I is responsible for determining the kinetics of activation, whereas repeat IV is responsible for determining the voltage dependence of activation and, at least in part, the current density. Accordingly, the two aspects of activation properties are not linked to each other and can be modulated separately. Alternative splicing of exon 29 in the IV VSD does not affect current kinetics, and conversely, acceleration of activation kinetics by insertion of heterologous sequences into the I VSD does not correlate with changes in the voltage dependence of activation. Moreover, also the molecular mechanisms for the control of voltage dependence and kinetics of activation are different. Regulation of voltage sensitivity is accomplished by a structurally well-defined mechanism entailing IVS3, the IVS3–S4 linker, and IVS4. It can be transferred from one VSD to another, suggesting that it basically involves the control of S4 gating charge movement through the IV VSD. In contrast, control of current kinetics cannot be transferred from one to another VSD, suggesting that it does not function by controlling the speed of S4 movement in the VSD. Likely it involves structures outside the I VSD that accomplish the transduction of the VSD movement to opening of the channel pore.
In voltage-gated sodium channels, distinct contributions of the four VSDs to activation and inactivation have long been known (reviewed in Ahern et al. ). In this channel, the IV VSD is distinct from VSDs I–III in that its movement is not necessary for channel activation but is a prerequisite to inactivation. Recently, voltage-clamp fluorometry was applied to analyze the individual contributions of the four VSDs of the CaV1.2 channel (Pantazis et al., 2014). Interestingly, in this channel, the voltage sensitivity and activation kinetics of the VSD II and III best resembled the ionic current properties, whereas VSD I contributed little and VSD IV not at all to channel gating. Our data agree with the notion of a heterogeneity of the four VSDs in CaV channels. However, they also suggest that in CaV1.1—the primary function of which is in activating RyR1—the specific roles of the individual VSDs are distinct from those in CaV1.2. Notably, the observation that unique features of the IVS3–S4 linker and IVS4 control voltage sensitivity in the IV VSD and, when transplanted, also in the I VSD, indicate that in CaV1.1 both of these VSD are essential for channel gating.
Considering this evidence in support of a modular organization of the CaV1.1 calcium channel, it will be of interest to also unravel the role of the remaining two VSDs of the II and III repeats in CaV1.1. In addition to their involvement in channel gating, these repeats are likely important in the activation of EC coupling. Because EC coupling activates with faster kinetics and at left-sifted voltages compared with CaV1.1a current activation, we assume that the I and IV VSD are not involved in this signaling process at all, but exclusively function in channel gating. Sequence similarities between the I and the III and between the II and the IV VSD of CaV channels suggest a twofold symmetry of the channel. The distinct voltage-sensing mechanisms reported here for VSDs I and IV may be replicated in VSDs III and II, respectively. However, this hypothesis remains to be tested in future studies.
We thank Ms. A. Benedetti for excellent technical support and maintenance of the muscle cell cultures.
Financial support of this study was provided by the Austrian Science Fund (FWF; grants P23479 and F4406 and graduate program W1101 to B.E. Flucher; and grant P27392 to M. Grabner) and the University of Innsbruck (grants P7400-027-011 and P7400-027-012 to P. Tuluc).
The authors declare no competing financial interests.
Eduardo Ríos served as editor.
- Abbreviations used in this paper:
- voltage-sensing domain
- Submitted: 7 January 2016
- Accepted: 18 April 2016
This article is distributed under the terms of an Attribution–Noncommercial–Share Alike–No Mirror Sites license for the first six months after the publication date (see http://www.rupress.org/terms). After six months it is available under a Creative Commons License (Attribution–Noncommercial–Share Alike 3.0 Unported license, as described at http://creativecommons.org/licenses/by-nc-sa/3.0/).